Why is there a minimum margin setting? Is the minimum margin from the hole center to the bending edge, or to the edge of the material? If my minimum margin is not enough, what hidden dangers will there be?
The minimum margin is the distance from the circular edge of the hole to the edge of the workpiece.
If the hole is too close to the edge of the plate, it means that the thin plate at the edge is not strong enough. After the rivet nut is installed, the following may happen:
The edge of the thin plate is squeezed and bulged and deformed; the nut is not installed firmly and is easy to fall off.
If the hole is too close to the edge of the plate, it means that the thin plate at the edge is not strong enough. After the rivet nut is installed, the following may happen:
The edge of the thin plate is squeezed and bulged and deformed; the nut is not installed firmly and is easy to fall off.
13C,Block B,Jinxing Building,Heping
Industrial Park,Changyong Road,Longhua
District
518001 Shenzhen
China
深圳市龙华区昌永路和平工业园金星大厦B座13
518001 深圳
中国
info@in-sail.com
Shenzhen In-sail Precision Parts Co.，Ltd
13C, Block B, Jinxing Building, Heping Industrial Park, Changyong Road, Longhua District
518001 Shenzhen
China
+86 0755-29002800
info@in-sail.com